selleri.de :: Kolektor med RS232

Från: Linn Helpline <Helpline@Linn.co.uk>
Datum: den 25 oktober 1999 11:35
Subjekt: Re:

Dear Roland

Many thanks for your email to the Linn Helpline and for your continued support.

Yes you can control the Ikemi and Kolektor via RS232. You need to get an add-on unit for both the Kolektor and the Ikemi to allow RS232. The RS232 add-on unit has a disc supplied for RS232 Command codes.

One PC comms port will allow control of BOTH products. That is, you do NOT need a PC Comms port for each product.
The PC to Kolektor/Ikemi cable is supplied with each add-on and another cable (RJ11-RJ11) is required to link control of the Kolektor/Ikemi.

We do not supply any PC software to control the products, however, the command string is simple and the products can easily be controlled via Hyperterminal software.

Requirements are 2 off KOL_RS232_UPG and a single Rj11 to Rj11 cable.

Best regards and happy listening!

Peter Nowicki

Author:	Karl_Erik [ Wed Jan 18, 2006 16:24 ]
Post subject:	Kolektor med RS232
Hei. Er det noen som vet hva RS232-inngang på Kolektor kan benyttes til? Gir det KNEKT-kompabilitet? Mvh Karl Erik

Author:	jajo [ Wed Jan 18, 2006 16:39 ]
Post subject:	Re: Kolektor med RS232
Karl_Erik wrote: Hei. Er det noen som vet hva RS232-inngang på Kolektor kan benyttes til? Gir det KNEKT-kompabilitet? Mvh Karl Erik Om jag minns rätt används RS232-ingången för att styra mikroprocessorn i Kolektor med dator. Nåt praktiskt användningsområde ser jag inte, men Linn har säkert användning för porten när de utför mjukvaruuppgraderingar. Knekt använder RJ45 eller RJ11-kontakter och Kolektor saknar stöd för detta. / jajo

Author:	Roland [ Wed Jan 18, 2006 21:45 ]
Post subject:
Tillåt mig klistra in ett mail från Linn Helpline från oktober 1999. Quote: Från: Linn Helpline <Helpline@Linn.co.uk> Datum: den 25 oktober 1999 11:35 Subjekt: Re: Dear Roland Many thanks for your email to the Linn Helpline and for your continued support. Yes you can control the Ikemi and Kolektor via RS232. You need to get an add-on unit for both the Kolektor and the Ikemi to allow RS232. The RS232 add-on unit has a disc supplied for RS232 Command codes. One PC comms port will allow control of BOTH products. That is, you do NOT need a PC Comms port for each product. The PC to Kolektor/Ikemi cable is supplied with each add-on and another cable (RJ11-RJ11) is required to link control of the Kolektor/Ikemi. We do not supply any PC software to control the products, however, the command string is simple and the products can easily be controlled via Hyperterminal software. Requirements are 2 off KOL_RS232_UPG and a single Rj11 to Rj11 cable. Best regards and happy listening! Peter Nowicki KOLEKTOR - RS232 ASCII Interface Specification And Commands Version 1.10 The RS232 interface on the KOLEKTOR allows it to be controlled by a touch screen, PC or any computer with an RS232 port. The KOLEKTOR obeys the commands received through the RS232 interface and replies to confirm a successful or unsuccessful operation. Så här ser några fungerande kommandon ut: $VOL +$ Increase volume by 1 $VOL -$ Decrease volume by 1 $BAS +$ Increase bass by 1 $TRB +$ Increase treble by 1 $MUTE [Y\|ON]$ Enable mute $LISTEN CD$ Select CD player source $LISTEN PHO$ Select Phono source Källa: Kolektor_rs232_commands.PDF

selleri.de https://www.selleri.de/

Kolektor med RS232 https://www.selleri.de/viewtopic.php?t=1869	Page 1 of 1

Page 1 of 1	All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/